You mostly observe black mold on your A/C Vents air ducts despite doing good housekeeping. It is developed due to damp environment and continuous air flow which help in the growth of molds and common mildew. It has made mess of your life. In this highly informative article, you will find useful tips on air duct cleaning in Arlington TX.
You can cope with the menace of mold growing on your air duct system by adapting the following steps:
· Before starting measures ensure you have adopted security measures, wear gloves and special face mask to avoid the contact of mold spores.
· First of all, Unscrew the ventilation grill of the A/C unit and rinse it first with detergent then water thoroughly.
 |
| Air Duct Cleaning Arlington Tx |
· Spray the interior side of the duct with water to check dispersing the dry mold.
· For efficient mold removal, disinfect the whole vent surface and grills with a mop dipped in the cleaning solution.
· Dry all parts then reassemble all.
· Last but not the least, dispense off all rags and cleaning waste solution in proper sealed plastic bag.
Molds in the air duct of HVAC system are very common. Mold is somewhat like a bugger. It grows in any damp area and damages it. The quickest mode of spreading of molds in the buildings is dispersing via forced-air duct HVAC system.
According to the U.S. EPA specified regulations, you must check regularly your HVAC systems for mold and moisture as both are dangerous for you. Draining system should also be checked. Moisture must be removed and blow dry all parts.
These valuable tips do the best for you to keep away mold from air duct system:
1. Firstly, turn off your HVAC system completely.
2. You must wear an N-95 respirator before checking any part of the system for safety purposes.
3. Replace wet filters etc. with drier ones and discard wastes properly.
4. Proper and effective draining of standing water through vacuum pump.
5. Always use the EPA registered disinfectant specified for HVAC system cleaning to clean your duct work, coils, pans, etc. in removing mold, mildew or any dirt. BBJ MMR-II disinfectant and mold cleaner are best choice to remove molds, bacteria and any foul odor.
6. As proper measure, clean duct work system step by step after detaching parts accordingly followed by fogging the area with the EPA approved disinfectant.
7. Later you should apply some good quality specified mold inhibitor to all sections of the HVAC systems. Good way’s Coil Shine -BC is the best EPA registered inhibitor available in Arlington used for HVAC systems to stop mold growth up to 2 years with a guarantee.
8. Finally, HEPA vacuum all which you have cleaned up.
There are many companies dealing with air duct cleaning in Arlington TX. They provide services of A/C & HVAC system to get rid of molds etc. Some companies have profound record and approved licensed authority to work in this field including, KIWI services, Bohannon Co, Dub’s heating and air conditioning services across Arlington TX. All have proper equipment and skilled professionals to deal with cleaning air duct issue.
All this stuff will certainly help you out in coping with the issue of your system’s air duct cleaning.
